Backup/Reset Frame - Samotech SM307 Manual De Uso

Wi-Fi
Set which Wi-Fi the frame connects to. If you are connecting to a network with a
captive portal a web browser icon should appear in top right corner of the screen.
Use this to open a browser where you can enter credentials to access the network.
Backup and Restore
Backup frame to external storage (e.g. microSD card). Tap to make a backup of
your photos, friends and settings. Time of the latest successful backup will be
displayed here. Any existing backup on the external storage will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of
receiving new photos or making changes to your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup is
up-to-date. This is done by confirming the date under "Backup frame to external
storage (e.g. microSD card)". If e.g. the last backup is to old or if no backup is
made, then press the "Backup frame to external storage (e.g. microSD card)"
button to make a new backup. It is important to note that you cannot restore a
backup to a new frame and keep the old frame operational at the same time. If
you wish to restore a backup on to a frame that has already been setup, then you
must first reset the frame. This is done by pressing the "Reset frame" button. This
will delete all data and reset the frame to the initial setup screen. On the setup
screen you can select the "Restore from backup" button which will restore your
frame according to the backup. If the "Restore from backup" button isn't visible,
then confirm that the external storage (e.g.microSD card) is correctly mounted.
Reset frame
Removes all data from your frame.
This will permanently remove all your photos, friends/connections and settings.
About
Check for update
Check if an update is available for your frame.
13