VEVOR TT-M-40-24 Manual Del Usuario página 16

PATCHING GUIDELINES
Tips:This product is equipped with repair materials (except glue). When air
leakage is caused by sharp objects during use, it can be repaired.
Because the product material is PVC, you need to purchase PVC glue to
repair the glue.
1、 Before repairing, clean the area around the damage to ensure the surface
is dry.
2. Apply a thin layer of glue evenly on the surface of the repair material and
the surface around the damaged air cushion.
3. Stick the repair material and air cushion firmly. It is recommended to use
a hot hair dryer to heat it. After it is dry, press it with your hands for 2 minutes,
and then press it with an object for 40-60 minutes before use.
Equipped repair material usage location tips
1.As shown in the picture, a ring-shaped repair material is configured. When
air leakage is found near the inflation port, the configured glue and repair
materials can be used to repair it.
- 15 -