Ryobi OPP1820 Manual Del Usuario página 4

■ Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■ Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
■ Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■ Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
■ Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
■ Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
4
Original Instructions
■ Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
■ Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
CORDLESS POLE SAW SAFETY WARNINGS
■ Never allow children or people who are unfamiliar with
the instructions to use the product. Local regulations
may restrict the age of the operator.
■ Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
■ Do not use the product when there is a possibility of
thunderstorm or lightning. Store the product safely
indoors.
■ Do not start using the product until you have a clear work
area, secure footing, and a planned retreat path away
from falling branches or limbs.
■ Beware of thrown, flying, or falling objects. Keep all
bystanders, children, and animals at least 15 m away
from the work area.
■ To protect yourself from electrocution, do not operate
the product within 10 m of overhead electrical lines.
■ Do not use the product on a ladder or on unstable
support. Always cut with both feet on solid ground to
prevent being pulled off-balance.
■ Operating similar tools nearby increases both the risk of
hearing injury and the potential for other persons to enter
the working area.
■ The use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■ Beware of the emission of lubricant mist and saw dust.
Wear a mask or respirator if required.
■ Inspect the product before each use. Check for the
correct operation of all controls. Check for loose
fasteners. Make sure that all guards and handles are
properly and securely attached. Replace any damaged
parts before use.
■ An incorrectly tensioned chain can jump off the guide
bar and could result in serious injury. Check the chain
tension before each use and frequently, especially a
new chain.