Ferm TSM1037 Traducción Del Manual Original página 10

"Recommended speed setting" below to
determine the correct speed, based on the material
being worked on and the type of accessory being
used. This overview enables you to select both
correct accessory and the optimum speed.
The 6 speeds indication lights (8) are equal to
the numbers 1, 2, 3, 4, 5 and 6 in the overview
"Recommended speed setting". Ultimately, the
best way to determine the correct speed for work
on any material is to practice on a piece of scrap.
Recommended speed setting
Grinding stones (Fig. D1)
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Felt wheels and tip (Fig. D2)
Material
Steel
Aluminium, brass
Plastic
Sanding bands and disc (Fig. D3)
Material
Wood
Steel
Aluminium, brass
Plastic
High speed cutter, Diamond wheel point and
Drill (Fig. D4)
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Bristle brush (Fig. D5)
Material
Stone, shell
Aluminium, brass
Abrasive disc (Fig. D6)
Material
Steel
Aluminium, brass
Plastic
10
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Repairs may only be carried out by a qualified
electrician or at a service workshop!
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Speed setting
Cleaning
2-4
Never use solvents such as petrol, alcohol,
4-6
ammonia water, etc. These solvents may damage
3-5
the plastic parts.
1-4
Do not spray the appliance with water and do
not immerse it in water. Electric shock hazard!
Speed setting
4-6
Do not use cleaning agents or solvents.
3-5
You may otherwise irreparably damage the
4-6
appliance.
• Wipe off the warm soldering tip (1) after use on
Speed setting
a damp sponge (12).
5-6
• Never scrape or file any solder residues off
2-4
the soldering tip with hard objects, as this will
3-5
damage the soldering tip (1).
1-4
ENVIRONMENT
To prevent damage during transport, the appliance
Speed setting
is delivered in a solid packaging which consists
6
largely of reusable material. Therefore please
3-5
make use of options for recycling the packaging.
5-6
1-4
The crossed-out wheelie bin symbol
means that this product shall not be
disposed of with normal household
Speed setting
waste. Electronic and Electrical
3-5
Equipment not included in the selective
3-5
sorting process are potentially dangerous
for the environment and human health
due to the presence of hazardous
Speed setting
substances. Please dispose of
4-6
responsibly at an approved waste or
3-5
recycling facility.
1-3