EN
Insert SIM Card and Battery
Before connecting your MiFi device to your computer for the first time, you must insert the
SIM card and insert and charge the battery.
➊
Press down on the arrows and slide open the door at the bottom of the device.
➋
Insert the SIM card into the SIM slot as shown in
Figure A.
➌
Now, insert the battery, lining up the contact points
as shown in Figure B, and replace the door back on
the device.
➍
Connect the AC mains charger to your MiFi device
and charge for a minimum of four hours before
use. The LED flashes while the device is charging and
glows solid when charging is complete.
For more information on charging the battery, please see
the user guide at www.novatelwireless.com
IMPORTANT: WHEN INSTALLING OR REPLACING A
BATTERY, OR INSERTING OR REPLACING THE SIM CARD,
ENSURE THAT YOUR MIFI DEVICE IS NOT CONNECTED
TO YOUR COMPUTER WITH THE USB CABLE OR A USB
POWER SUPPLY. BEFORE USING YOUR MIFI DEVICE,
REVIEW THE BATTERY TIPS AND SAFETY DISPOSAL
INSTRUCTIONS IN THE REGULATORY SECTION AT THE END OF THIS GUIDE.
6
Figure A
Figure B