D'Orly CUPRO 3D Manual De Usuario página 2

ENGLISH
Points of attention 3
Specifi cations 3
Product overview 4
Operation 5
Accessories 6
Powering the instrument 7
Declaration of conformity 27
NEDERLANDS
Aandachtspunten 9
Specifi caties 9
Productoverzicht 10
Gebruik 11
Accessoires 12
Voeding 13
Certifi cering 27
ESPA OL
Puntos de atención 15
Características 16
Visión general del producto 17
Funcionamiento 18
Accesorios 19
Alimentación del instrumento 27
DEUTSCH
Punkte, die zu beachten sind 21
Spezifi kationen 21
Produktübersicht 22
Betrieb 23
Zubehör 24
Stromversorgung des geräts 25
Konformitätserklärung 27
CLASS II
KLASSE II NIET IN LASER STAREN
CLASE II
KLASSE II NICHT IN DEN STRAHL STARREN
DO NOT STARE INTO BEAM
NO MIRAR FIJAMENTE AL HAZ
2
POINTS OF ATTENTION
!
• Make sure the connection between the Cupro instrument and it's mounting
point (e.g.: tripod) are fi xed fi rmly before use.
• Switch o the laser when moving it.
• Do not stare directly into laser beams.
• Do not clean the Cupro with alcohol or any other chemicals.
• Do not expose the Cupro to rain or excessive moisture for extended periods.
• Remove the battery when the Cupro will not be used for periods over a
month.
• Contact your dealer when calibration or service is deemed neccessary.
Unauthorized opening of the instrument may void your warranty.
SPECIFICATIONS
i
• 3D Green laser level with tilt function.
• Working range without detector:
• Working range with detector:
• Laser line wavelength:
• Laser class:
• Accuracy:
• Self-levelling range:
• Working temperature:
• IP rating:
25m
50m
520nm
Class II
±1mm/5m
±2,5°
-5~45 °C
IP54
3