Thulos MOBILE+ MB-CTR-04 Manual De Instrucciones página 6

SAFETY INSTRUCTIONS
- Keep the device dry at all times.
- Do not use in damp areas.
- Repairs should only be carried out by an authorized service technician.
- Never use near water or other liquids.
- Do not use in bathtubs, showers or near tanks filled with water.
- This appliance is for household and occasional use only.
- Do not strike the appliance.
- Do not leave unattended while charging the battery.
- After use, store in areas free of dust and humidity.
- Avoid prolonged use. Take a break at intervals of about 30 minutes.
- Avoid looking at the light bar on the hand control when it flashes.
- Stop using the hand control immediately if you feel any discomfort or pain in any part of
your body.
- This product is designed to be used with hands only.
- The vibration function of this product may aggravate injuries. Do not use the vibration
vibration function if you have any ailments or injuries to the bones, joints or muscles of
the hands or arms. In this case deactivate the vibration function.
- Please note that some software titles activate the vibration function by default.
- Do not expose the product to high temperatures, humidity or direct sunlight.
- Do not place heavy objects on the product.
- When using the motion sensor function, be careful of the following points:
* If the control hits a person or object, it may cause accidental injury or damage.
* When using the controller, hold it firmly to ensure that it does not slip out of your
hand.
* If you are using a controller that is connected to the PlayStation 4 system with a
USB
cable, make sure there is enough room for the cable so that it does not hit a person
or objects.
- If you use the cable-connected controller, never pull the cable to disconnect.
TIPS FOR EXTERIOR CARE
To prevent or delay the exterior of the product from deteriorating or discoloring:
- Always keep clean and free of dust.
- Do not place any rubber or vinyl material on the exterior of the product for an
extended period of time.
- Use a soft, dry cloth to clean the product.
- Do not use solvents or other chemicals.
- Do not wipe with a chemically treated cloth.
BATTERY
- The first thing to do before using the controller is to charge the battery to 100%.
- Once connected to charge, never interrupt charging until it reaches 100%.