Descargar Imprimir esta página

MSW Motor Technics S-POWER MINI DC SYSTEM Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
3.2.
Device use
Charging operation.
Connect the solar panel to the input port of the solar charging system, the charging indicator will light up
red to indicate that charging is in progress. When charging is complete, the charging indicator will light
green.
When the device is charging, turn off the ON/OFF switch, do not switch on any load to reduce charging
time.
Mobile phones and digital products charging operation.
Connect your smartphone, tablet, and similar electronic device to a USB port to charge it.
Light bulbs.
To power a 12V DC bulb, connect it to one of the 'light bulbs connection socket' ports and turn it on using
switch. If the load current exceeds 3A, the system will automatically switch off all outputs.
3.3.
Cleaning and maintenance
a)
Always unplug the device before cleaning or putting it away.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
Do not allow water to get inside the device through vents in the housing of the device.
g)
Clean the vents with a brush and compressed air.
h)
The device must be regularly inspected to check its technical efficiency and spot any damage.
i)
Use a soft cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
k)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
6 – USB 5V DC outputs

Publicidad

loading