Publicidad
Idiomas disponibles
Idiomas disponibles
Use
3.7 kW sockets, modes 1 and 2, 2P+E, 16 A, 230 V, German standard with safety shutter.
- Used for charging electric vehicles safely in modes 1 and 2 (using domestic mains socket).
- 2P+E socket certified for all electric vehicles (mode 1 and mode 2), cost-effective and safe. Fitted with optimised connection terminals, metal contacts with
silver-plated surface treatment (5 µm). Fitted with Green'up System, a Legrand technology.
- Patented Green'up System: The electric vehicle detects the secure Green'up Access infrastructure and selects the maximum power that can be supplied via
the socket (thereby reducing charging time).
- Suitable for use at home or at the workplace.
- Connected from the electrical panel by a dedicated line (1 line per socket) with protection via a 30 mA - 16 A RCBO, type F (HPi).
Multi-purpose socket compliant with plug and socket standard IEC 60884-1.
Mounting
By screwing the housing to the bracket using 2 (or 4) screws
Ø 4 to 4.5 mm. IP 55 weatherproof fixing for all surfaces.
ISO 20 - Cable type 1000 R02V
Rigid or identical flexible version
76,5
Installation
MODE 2
One socket only per dedicated line
Assembly
The front part (cover and mechanism) is screwed onto the box using 4 coarse pitch screws.
(Minimum tightening torque for IP 55: 0.5 Nm).
Ø 5 mm
Electrical characteristics
Voltage: 230 V~
Power: 3.7 kW
Current: 16 A
Frequency: 50/60 Hz
For safe charging of electric vehicles supplied in modes 1 and 2 (charging on a domestic socket).
Green'up Access safety sockets are specially designed by Legrand
for charging electric vehicles and are compliant with applicable
temperature and durability tests.
Your installer will advise you on the most suitable electricity tariffs with
regards to charging your vehicle.
Always pull out the plug before starting the vehicle.
Only the cables provided with the vehicle may be used with the EV sockets.
The use of extension leads and adapters is not permitted.
The EVSE unit must be suspended.
Use of a voltage surge protector is recommended.
Safety instructions
This product must be installed according to the installation instructions by a
qualified electrician. Misuse and incorrect installation may result in electric
shock or fire. Before carrying out the installation, read the instructions and
take note of the specified mounting position of the product.
Do not open, dismantle, alter or modify the device except when otherwise
indicated by the instructions. Legrand products must be opened and repaired
exclusively by Legrand trained and qualified technicians. Any unauthorised
opening or repair will cancel in full any liability, rights to replacement and
guarantees.
Only use Legrand brand accessories.
Publicidad
