ICUserver icucam 5 Instrucciones De Uso página 20

20
Deleting videos/photos
Press "MENU" in playback mode to delete individual or all photos. Then
press "MENU" again.
Camera setup
In setup mode, press "MENU" to access the operating menu. In Settings, use
"", "", "" or "" to navigate. Confirm changes with "OK". Press "MENU"
to return to the menu without saving the changes.
USB connection
When the camera is connected to a computer via a USB cable, the
memory card will appear in the computer file menu.
Camera
Name
Mode
Image
resolution
Night quality
Number of
images in
each series
Video
resolution
Video length
The camera name can be set or changed here. The name
is used for identification purposes and is shown on the
photos.
Photo (= default): The camera takes photos based on the
set number of continuous shots and image resolution.
Photo & video: When triggered, the camera first takes one
or more photos, then a video based on the set values for
the number of continuous shots and image resolution as
well as video length and resolution.
5MP (2560*1920) (=default),
8MP (3264*2448), 12MP (4000*3000)
Highest quality: Short shutter speed to minimize motion
blur for better image quality, but reduced IR flash range.
Balanced: Combination of highest quality and maximum
range.
Max. Range (= default): Longer shutter speed to extend IR
flash range for better night vision, but lower image quality.
1 (= default) Up to 9 photos can be taken for each series.
The first image in each series is sent.
FHD-1920*1080 (=default), HD-1280*720, VGA-640*360
5~60 seconds, default 10 seconds
ENGLISH