MSW Motor Technics MSW-GDOOR-003B Manual De Instrucciones página 53

5.7.4 Advanced Menu Instruction
Menu
Long press "PROG" 2 seconds
to enter into base menu.
Travel time adjustment
Photo Sensor
Electric Lock
Reverse push lock
Option
Press "+"(up) or "-"(down) to select;
Press "SET" to confirm.
Time of gate1
Time of gate2
Time fine tuning of gate 1
Time fine tuning of gate 2
N/C; photo sensor normally is
on.(Default)
N/O; photo sensor normally off.
Electric lock normally is on. (Default)
Electric lock normally is off.
Reverse push lock mode of
Reverse push lock mode on.
(When the electric lock is started, M1 will run
for a distance in the direction of the door to
prevent the electric lock from getting stuck and
unable to be opened.)
EN
Default/Attention
After automatic learning, if the stroke
is not ideal, it can be adjusted
manually. The shorter the time under
the resistance limit, the farther the
deceleration distance of the door.
And in the Hall limit, the shorter the
time, the shorter the door travel.
N/O; photo sensor normally
on.
Electric lock normally on.
Reverse push lock mode off