Publicidad
Idiomas disponibles
Idiomas disponibles
CARTRIDGE OPERATION/FEATURES
Variable Shade Control
The shade can be adjusted from shade 9 to 13 based upon welding process or
application (refer to Shade selection chart on page 6). The variable shade
control knob is mounted on the exterior of the helmet shell. Grind mode can be
selected by rotating the shade control knob counterclockwise till an audible click
is heard. Grind mode is intended for grinding only not for welding.
Solar Power
This helmet is powered by solar energy. As such, there is no battery that requires
replacement.
Variable shade
control Knob
5
Publicidad
