Publicidad
Idiomas disponibles
Idiomas disponibles
Step 4
R
Connect the seat cushion and backrest using three M8x40 screws with spring washers and
small washers.
Step 5
Align the upper part of the assembled chair with the gas lift and insert it.
Step 6
K
F
Insert the armrests into the seat cushion, then use the knobs and large washers to secure
the armrests onto the cushion.
Step 7
Apply force to insert the headrest into the hole in the backrest. The assembly is now
complete.
03
I
Q
E
D
B
Operation Instructions
(Please refer to the actual size.)
Armrest height
adjustment;Armrest left
and right adjustment;
Armrest forward and
backward adjustment.
Pull out the hand lever to
adjust the seat cushion to
slide back and forth.
Seat height adjustment:
Rotate the hand lever.
Safety Installation
1. Each chair is designed to support the weight of one person only.
2. Please use the chair on a flat, even surface.
3. Do not allow children under the age of 5 to sit on the chair without supervision.
4. Avoid sitting on the armrest to prevent potential accidents.
5. Do not stand on the chair, use it as a ladder, or step on it.
6. Please refrain from placing excessive weight on the chair or using it as a makeshift trolley.
7. Avoid using sharp or pointed objects that could damage the chair, and keep it away from
open flames or sources of heat.
8. For your safety, do not attempt to disassemble the gas lift mechanism.
Headrest height
adjustment.
Pull up the backrest to
adjust the backrest.
Turn the backrest knob to
adjust the front and back
of the waist pillow and the
height of the waist pillow.
Tighteness adjustment for
backrest tilting
Tighten
Loosen
Back tilting position
adjustment：pull front
the hand lever to adjust;
pull back to lock up.
04
Publicidad
