Battery Charging; Battery Information - PEL S150 Manual De Uso

2 Press until your security code appears
on the display.
3 Press briefly to unlock and turn on the
energizer.
4 Press and
display shows
5 Press until the display shows your
current security code.
6 Press briefly. The display shows zero
7 Press three times.
8 The display returns to normal with the
padlock pointer off, indicating the security
code feature is disabled. A security code
will not be required when the energizer is
switched on.

Battery charging

The solar panel can fully charge a flat battery in
two weeks, provided the energizer is switched
off and there is adequate sunlight. The battery
can also be charged using a 12 V battery charger
suitable for charging sealed, lead-acid batteries.
This should have an output voltage of 13.8 V
and output current not exceeding 1 A.
When fully charged, the battery should be able
to power the energizer for over three weeks
(0.15 J model) or two weeks (0.25 J and 0.5 J
models) with no sunlight.
Warning!
The battery must be disconnected
and removed from the energizer before
connecting it to a battery charger.
together until the
.
.

Battery information

If a replacement battery is required, use a 12 V,
7 Ah, sealed lead-acid battery (suitable for all
models). Do not use a non-rechargeable battery.
Do not dispose of the battery in a land-fill or in a
fire.
In the event of a spill or leakage from a VRLA
battery:
Contain small spills with dry sand, earth
•
and vermiculite. Do not use combustible
materials. If possible, carefully neutralise
spilled electrolyte with soda ash, sodium
bicarbonate, lime, etc.
Wear acid-resistant clothing, boots, gloves
•
and a face shield.
Do not let un-neutralised acid get into the
•
sewage system.
Neutralised acid must be managed in
•
accordance with approved local, state and
federal requirements. Consult your state
environmental agency and/or federal EPA.
Energizer maintenance
Clean the solar panel regularly with a soft cloth
using glass cleaner or a mild solution of
detergent and water. This will ensure the solar
panel functions efficiently.
When transporting the energizer, protect the
solar panel to prevent the glass surface from
being damaged.
Energizer storage
If the energizer is stored for an extended period,
the battery may discharge and become
damaged.
7