Qnubu BOLT MANUAL 1T Manual De Usuario página 11

WORKING STEPS:
1. Make sure that the device is used in an appropriate environment,
keep machine away from kids.
2. Power off the machine when nish using.
3. Please be careful not to touch the heating plate when it is heated.
qnubu.com
Connect the power cord and turn the
switch on.
Set the desired time and temperature
on the controller.
Wait until the press reaches the set
temperature.
When the desired temperature is reached,
insert your material, lower the pressure
handle and press the countdown button.
When the countdown is over, the press will
make a beep sound; the, raise the handle
and remove the pressed material.
EN
!