Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1.
Cord
2.
Power selector
3.
Rotation button
4.
Release button
5.
Interchangeable brush
Fig. 2.
1.
Comb for straightening hair
2.
40-mm round comb
3.
66-mm round comb
4.
76-mm round comb
5.
47-mm round brush with retractable bristles
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the device out of its
box and remove all packaging materials. You can keep the original box and other packaging
elements in a safe place. This will help you prevent product damage when transporting it in
the future. In case the original packaging is disposed of, make sure all packaging materials
are recycled accordingly.
Make sure all parts and components are included and in good conditions. If any of them are
missing or not in good condition, please contact Cecotec's official Technical Support Service
immediately.
Box contents
•
Bamba CeramicCare 5in1 Gyro
•
Comb for straightening hair
•
40-mm round comb
•
66-mm round comb
•
76-mm round comb
•
47-mm round brush with retractable bristles
•
Instruction manual
26
BAMBA CERAMICCARE 5IN1 GYRO
Note
A slight odour and smoke might appear when heating the device for the first time. This is
completely normal, and it will stop after using the device.
3. OPERATION
1.
Wash and condition your hair.
2.
Dry it with a towel and comb it.
3.
Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance and that the wall outlet is grounded. Plug the device to a power supply.
4.
Install the accessory to be used with the slots aligned pressing the release buttons,
press the attachment against the hot air brush's body. You will hear a click when it is
correctly into place. Select level 1 with the power selector to fix your hair with a strong
and warm air flow. Select level 2 for a fast drying and combing, or the cold drying for a
soft drying to fix your hair style, preventing your hair from overheating.
5.
To remove the accessory, press the release button and pull it out gently.
6.
The device includes a rotation function.
7.
Hold the rotating button for the accessory to rotate to the right o rleft.
8.
Unplug the device from the socket when not in use.
Shaping the hair
1.
Comb your hair and form locks.
2.
Take a lock of hair and place it in the brush. Once this is done, turn the tip inwards or
outwards. Do not roll the hair in the brush, it could get tangled. Instead, slide the brush
along the length of the hair lock as you rotate.
3.
Keep this position from 7 to 10 seconds and remove it. In case you have chosen the
round brush head with retractable bristles, turn the tip of the brush head to hide the
bristles and remove the hair.
4.
Repeat this step with the rest of your hair.
5.
When finished, shape it using your fingers.
After use
1.
Turn the device off and unplug it.
2.
Place it on a heat-resistant surface until it cools down.
3.
Remove the hair and dust from the device and accessories.
4.
Clean the device with a soft cloth and store it in a dry place.
ENGLISH
27
BAMBA CERAMICCARE 5IN1 GYRO
Publicidad
