Publicidad
Read these instructions carefully before use!
SAFETY RULES
- Always wear these safety goggles at work.
- Use the protective plastic bag to store the goggles.
- To prolong the life of these goggles, keep them in a cool, dry place,
Inspect them regularly for scratches, cracks and other damage to the lenses. Proper use and care will ensure that your goggles last a
long time. Replace scratched or damaged glasses with new ones.
- After use, clean the glasses with a cloth and a mild detergent. Do not use any chemical cleaning
cleaning substances.
- Do not use glasses with damaged frames.
- Do not use glasses that are scratched, cracked or whose transparency does not improve even after cleaning.
- Protectors that have suffered an impact must not be used and must be discarded and replaced.
- Protection corresponding to code numbers/letters 7, 9, CH is provided by the complete protector only if the respective symbols are
identical on the lens and frame.
- These goggles are designed to protect the user's eye from accelerated chips and particles. The lens of the goggles withstands the
impact of a 6mm steel ball with a minimum mass of 0.86g accelerated to 45m/s.
- The sides of the safety glasses come into contact with the skin. The material from which they are made can interact with chemical
substances and cause allergic reactions in allergy-prone people.
- Translucent glass does not protect against optical radiation during welding, etc.
- Replace safety glasses with new ones periodically.
- Do not modify the goggles under any circumstances.
- Keep this user manual for future reference.
- If the impact level symbols on the lens and frame do not match, the lower level should be assigned to the full-face protector.
- Do not wear these goggles over prescription glasses. This can be a source of danger in the event of contact with a particle thrown
at high speed.
For your safety
- To avoid accidents, always use certified goggles.
- Also use other appropriate personal protective equipment.
- Keep your workplace clean and tidy.
- Follow safety instructions and work methods.
Instructions for use
Adjust the safety goggles to fit comfortably and cover the eyes. When used correctly, safety glasses will provide the required
protection for 2 to 3 years.
Maintenance
- Clean the glasses with lukewarm water (room temperature) and use a mild detergent. Do not use hot water or solvents.
- After cleaning, wipe with a soft cloth. Never use abrasive cloths or substances, and do not dry the glasses near heat sources.
- If necessary, add a small amount of disinfectant to the cleaning fluid. Follow the disinfectant manufacturer's instructions.
Stockage
- Store protective eyewear in its original packaging and do not place any other objects on top of it.
- Keep protective eyewear in a dry, well-ventilated place away from direct sunlight and chemical substances.
Marking
Frame: 16321 JJI C 1-M CE
Glass: 16321 JJI 1 C
Model: YSA2
Warranty
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
Explanation of marking
JJI: Manufacturer Identification
EN ISO 16321-1: European standard number
C: Impact resistance (45m/s)
1: Reinforced optical performance
1-M: False head used for the certification of these glasses, in accordance with EN ISO 16321-1
XX/XX: Batch number
2
EN
Publicidad
