Qnubu PRO HYDRAULIC 2T Manual De Usuario página 12

CONFIGURATION
TIME TEMPERATURE
86
PV
8
SV
S
SET
PANTALLA INICIAL
Temperature setting:
Press the SET button
buttons
Time settings:
Press the SET button
buttons
Con rm settings:
After nishing setting the time and temperature you must press SET
con rm settings. The plates will start to heat up.
Countdown:
After closing the plates, press the countdown start button.
PRESSURE RELEASE VALVE ADJUSTMENT:
Before applying pressure with the hydraulic jack CLOSE the pressure release valve turning to the RIGHT. Then
the system will be ready to apply pressure. IMPORTANT: Apply the pressure smoothly once the pressure limit
is reached, do not force the machine. May cause oil leaks and hydraulic system failure NOT covered by
warranty. To realease pressure on the plates, OPEN the pressure release valve by turning it to the LEFT. The
hydraulic system will release the pressure and the plates will open automatically.
Close
qnubu.com
SP
PV
8
SV
S
SET
CONF. TEMP.
1 time, the display shows "SP", then use the
to increase or decrease.
1 time, the display shows "ST", then use the
to increase or decrease the pressing time.
Open
TEMPERATURE
& TIME SETTING:
PV
8
SV
S
SET
Decrease button
CONF. TIEMPO
DO NOT FORCE THE PRESS!
IF YOU TRY TO APPLY MORE
!
PRESSURE MAY DAMAGE THE
PRODUCT .
EN
SET button Increase button
Countdown button
again to