Publicidad
Idiomas disponibles
Idiomas disponibles
3. Open the water tank cover and fill the tank up to the "MAX" line. The water level can be
observed through the see-through part of the tank with the iron placed upright.
4. Empty the water tank after each use.
5. Pour out the remaining water after use.
Note
Do not use chemically descaled or perfumed water.
-
Whenever you fill or empty the water tank, you must do so with the iron unplugged from
-
the mains. Do not exceed the "MAX" mark on the tank.
Do not use additives or add other liquids such as perfume, vinegar, starch, condensed water
-
from dryers or air conditioning systems, or chemicals, as this may damage the product.
This product is designed to work with tap water. However, to ensure optimal performance
-
for longer, you can mix tap water with distilled water in a 1:1 ratio. If water in your area is
very hard, the mixture of tap water and distilled water should be in a 1:2 ratio.
Dry ironing
1. Fill the tank as described in 'How to fill the tank'.
2. Place the iron upright.
3. Plug the iron.
4. Turn the temperature adjustment knob to the "MIN" position.
5. Preheat the iron until the indicator light turns off.
6. You can now proceed to dry ironing.
Warning: if temperature is decreased after ironing at a high temperature, do not start ironing
until the soleplate cools down to the selected temperature.
Using the spray
Before using the spray function, check for ironing instructions on the fabric label to avoid
-
stains.
The spray function is especially useful for removing stubborn creases and when more
-
humidification is needed. The spray can be used with steam or dry ironing. Simply press
the spray button when you want to spray water on the fabric.
Steam ironing
1. Fill up the iron as explained below: filling up the water tank.
2. Place the iron upright and turn the temperature adjustment knob to the steam position. 3.
3. Plug the cord into a power outlet.
4. Turn the temperature adjustment knob to the steam position. Steam ironing is only
possible at the highest temperature settings indicated by the "MAX" mark; otherwise,
water will drip from the soleplate.
5. Preheat the iron until the indicator light turns off. When the correct temperature is reached,
the indicator light will turn off.
ENGLISH
IRONHERO 2600 FORCE
37
Publicidad
