Publicidad
Idiomas disponibles
Idiomas disponibles
product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the
product in humid conditions.
20.Periodically check the power cord condition. If the power cord is damaged the product
should be turned to a professional service location to be replaced in order to avoid
hazardous situations.
21.Never use the product with a damaged power cord or if it was dropped or damaged in
any other way or if it does not work properly. Do not try to repair the defected product
yourself because it can lead to electric shock. Always turn the damaged device to a
professional service location in order to repair it. All the repairs can be done only by
authorized service professionals. The repair that was done incorrectly can cause hazardous
situations for the user.
22. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
23.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
24. Do not allow the motor part of the device to get wet.
25. Do not touch the hot surfaces of the device.
26. After turning off the appliance, before cleaning or storing it, disconnect the power plug
from the socket and allow the equipment to cool down. Please wait long enough because the
heated device cools down slowly.
27. Do not use aggressive detergents in the form of emulsions, milks, pastes, etc. to clean
the housing, as they may, among other things, remove informative graphic symbols such as
scales, markings, warning signs, etc.
28. The device is not designed to work with external schedulers or separate remote control
system
29. Do not cover the device, it might cause the accumulation of heat in its interior and it may
cause damage or fire.
30. Hairsprays contain flammable materials. Do not apply them while using the device.
31. Do not use the device on people who are sleeping.
32. During operation, do not place the device on wet surfaces or clothes.
33. During operation of the device, metal elements heat up to high temperatures. Do not
touch hot parts of the device with your bare hands and do not allow contact with the scalp,
as this may result in burns.
DESCRIPTION OF THE DEVICE
1. Exhaust
4. Power & air speed switch
7. Backlight
USING THE DEVICE
Set the desired speed with the switch (4):
0 - disabled
1 - low speed
2. Concentrator magnetic ring
5. Inlet cover grill
8. Digital display
2 - high speed
3. Temperature setting button
6. Power cord
9. Magnetic concentrator
4
10. The pouch
Publicidad
