AOKE WP-H76 Manual De Usuario página 5

More
1. Select "More" in the menu, and press « OK ». The handset will display a QR-code
which leads to the handset instructions.
- To change the paramters:
2. Press and hold « OK » for 10 seconds, the handset will display "S-x" ( "x" is the
parameter group with values of 1, 2, 4 and 5).
3. Select the desired parameter you would like to adjust.
- S-1 = Choose Inch/CM
- S-2 = Adjust the sensitivity of the Anti-Collision sensor
- S-5 = Set a minimum height to be displayed on the handset
- S-6 = Set automatic or manual operation of the memory buttons
- For S-1: 0 = Inch and 1 = CM
- For S-2: 0 = off, 1 = the least sensitive and 8 = the most sensitive
- For S-5: you can choose from the full height range of the handset
- For S-6: 0 = manual operation of the memory buttons and 1 = automatic operation
of the memory buttons
After you have selected the desired setting for the selected parameter group, press
« OK ».
You have now successfuly set the parameters.
The Reset Function
1. Select "Hard reset mode" in the menu, and press « OK ».
- The handset will display "Please Wait". A longbuzzer will be heard in about 25
seconds, and the handset will display "Please keep pressing arrow down to reset".
2. Press « ∨ » to reset.
- After the reset, the parameters are restored to the factory settings and forced to
initialize.