Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Fastening the measuring tool safety
strap (figure 3).
Always secure the product with the supplied
safety strap.
Switching off the magnetization
(figure 4).
Slide the handle-lever sleeve upward.
Set the hand lever to OFF.
The handle-lever sleeve automatically
retracts back to the starting position.
Corrective Action.
Malfunction
The movable clamping jaw
cannot be moved.
The magnetic holding
power is strongly reduced.
Meaning
Clamping a work-
piece is not possible.
The magnet is defec-
tive.
Fig. 3
Safety strap
Fig. 4
OFF
2.
1.
Corrective action
Check the seating of the screws on the
bottom side of the clamping jaw. In
this case, reduce the tightening torque
of the two screws.
Lubricate the two sliding surfaces of
the vise regularly.
Please refer to a FEIN customer ser-
vice agent.
3.
Hand lever, magnet
Publicidad
