Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Safety
Symptom
The light comes on for
no apparent reason.
Coverage area of sensor
is poor.
The lights stay on
continuously.
The lights flash on and
off.
216383_s1_s57-5059340231648-Blooma-A5-IM-V02.indb 4
216383_s1_s57-5059340231648-Blooma-A5-IM-V02.indb 4
Possible Cause
Reflective objects (such as
swimming pool) in the coverage area.
Sunlight is falling onto the lens.
Unit is sensing motion in the
detection zone.
Choose a suitable location for
installing the product, away from
trees, hot ventilator dusts, street
lighting and traffic, which may
interfere with its operation.
The product is wired through a
dimmer or timer.
The unit may be suffering from false
activation.
Ensure the unit is not positioned to
detect unwanted objects e.g. cars /
people using roads / footpaths next
to your property. Occasionally, wind
may activate the sensor. (Sometimes
passages between buildings etc. can
cause a "wind tunnel" effect.)
The unit is operated in the mode of
the motion sensor being deactivated.
Heat or light from the bulbs may be
turning the sensor on and off.
Heat is being reflected from other
objects and may be turning the
sensor on and off.
Solution
Relocate the unit.
Mount unit in a sheltered place.
Test the motion sensor by covering
up the front curved lens with
cardboard to block the view. If the
light turns off then something in
the detection zone is triggering the
sensor. Relocate the unit or change
the sensitivity (distance) of the
sensor.
Relocate the unit.
Do not use a dimmer or timer to
control the product. Repelace the
dimmer or timer with a standard on/
off wall switch.
Cover the sensor lens completely
with a thick cloth. This will prevent
the sensor from "seeing" anything.
If the unit now switches off after
the set time duration and does
not re-activate, this indicates that
the problem was caused by false
activation.
Slightly adjusting the direction /
angle of the sensor head.
Relocate the unit.
To activate the motion sensor.
Relocate the unit, away from the light
source.
Relocate the unit.
4
10/15/21 10:35 AM
10/15/21 10:35 AM
Publicidad
