Descargar Imprimir esta página

Regent QL500WL Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

QL500WL I. S. 325-0414
Congratulations. You have purchased a Regent industrial grade 500
watt quartz halogen floodlight. This floodlight is perfect for security light-
ing or for illuminating signs, recreational areas, and buildings.
What you need
• Screwdriver
• Adjustable wrench
• Threaded junction box coverplate and gasket (must be UL listed
for wet locations)
What's included
• Light fixture (A)
• 500 watt quartz halogen bulb (B)
• Mounting arm (C)
• Locknut (D)
What to know
• For outdoor use only.
• UL and CSA listed for wet locations.
• Fixture must be connected to a 120 volt, 60 Hz power source. Any
other connection voids warranty.
• Fixture should be mounted to a grounded junction box marked for use
in wet locations.
• Keep away from flammable objects. Do not mount body of
fixture within one inch of any combustible material.
• The bulb and the fixture get extremely hot during use.
• Always replace bulb with the same or lower wattage than the bulb
included. Installing a higher wattage bulb could create a fire hazard
and shorten the life of the bulb. Use of higher wattage bulbs will void
the warranty.
• Never touch the bulb with your bare hands. Handle the bulb with gloves
or a soft cloth. Oil from your skin can cause premature failure.
• For maximum bulb life, position light so that
the quartz halogen bulb remains within 4
degrees of horizontal.
• If lens is replaced, use only tempered safety
glass of equal thickness.
• Fixture should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system, and the
method of electrically connecting the fixture to it, must be in accordance
with the National Electrical Code and local building codes.
11/3/05
4:03 PM
Page 2
B
2
QL500WL (Bronze)
A
C
D

Publicidad

loading