Publicidad
Idiomas disponibles
Idiomas disponibles
FIRST USE
FIRST USE
1.
1.
Open the box and unpack the product.
Open the box and unpack the product.
2.
2.
Make sure there is enough space to pull all parts before starting assembly.
Make sure there is enough space to pull all parts before starting assembly.
3.
3.
Necessary to remove the water tank to fill it.
Necessary to remove the water tank to fill it.
4.
4.
Put clean water until MAX signal. Replace the water tank at its place and dry any piece
Put clean water until MAX signal. Replace the water tank at its place and dry any piece
of water. If you have any difficulty placing the tank in the correct position, please read
of water. If you have any difficulty placing the tank in the correct position, please read
"cleaning and maintenance".
"cleaning and maintenance".
5.
5.
To use ice cubes, open the tank and insert them inside the water tank.
To use ice cubes, open the tank and insert them inside the water tank.
6.
6.
Plug in the unit.
Plug in the unit.
NOTE
NOTE
1. Do not put ice pack or ice cube into the water tank when. It is full as the water may
1. Do not put ice pack or ice cube into the water tank when. It is full as the water may
overflow.
overflow.
2. The ice pack should be frozen 2-3 hours before use.
2. The ice pack should be frozen 2-3 hours before use.
3. The ice pack is sealed in factory, please do not try to open it.
3. The ice pack is sealed in factory, please do not try to open it.
OPERATING MODES
OPERATING MODES
ON / OFF Button
ON / OFF Button
a. Press the ON/OFF button. The indicator light comes on and the unit will start
a. Press the ON/OFF button. The indicator light comes on and the unit will start
to operate.
to operate.
b. Press the ON/OFF button again to turn off the unit.
b. Press the ON/OFF button again to turn off the unit.
13
16
Publicidad
