Publicidad
Idiomas disponibles
Idiomas disponibles
The operation of any lawn mower can result in
foreign objects thrown into the eyes. which can
result in severe eye damage_ Always wear
safety glasses or eye shields while operating
your lawn mower or performing any adjust-
ments or repairs, We recommend a wide
vision safety mask over the spectacles or
standard safety glasses.
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance+ Speed is not
adjustable,
ENGINE ZONE CONTROL
CAUTION:
Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury.Do not under any
circumstances attempt to defeat the
function of the operator contro!,, The blade
turns when the engine is running,,
° Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
= Raise wheels for tow cutand lower wheels
for high cut°
. Adjust cutting height to suit yourrequire-
ments+Mediumposition is best for most
lawns+
- To change cuttingheight, squeeze adjuster
levertowardwheel Movewheel upor down
to suityourrequirements Be sure all wheels
are in the same setting,
NOTE: Adjuster is properlypositioned when
platetab inserts into hole in tever.Also. 9-
positionadjusters (ifso equipped)allow lever
to be positionedbetween +.he platetabs°
LowerWheelsfor High Cut
_
Lever
RaiseWheelsfor LowCut
TO ATTACH GRASS CATCHER
• Close the flip lid. Flip lid must be closed
while operating lawn mower.
°Uft the reardoor on the mower housing and
place the grass catcher frame onto the
formed tabs on the rear door hinge bracket.
• The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catcher frame.
CAUTION; Do not runyour lawn mower
without dipping deflector or approved grass
catcher in place, Never attempt to operate the
lawn mower with the rear door removed or
propped open,
Hinge
bracket
Grass catcher
Formed
tabs
TO EMPTY GRASS CATCHER
• To remove grass catcher, release operator
presence control+ barto stop engine,
= uft up rear door and remove the grass
catcher by the handle,
NOTE:
Do not drag the bag when emptying;
itwill cause unnecessary wear,,
Publicidad
