Publicidad
Idiomas disponibles
Idiomas disponibles
• Take safety measures when handling petrol to re-
duce the risk of serious injury.
• Use a suitable petrol can when filling or draining the
tank.
• Carry out this work in clean, well-ventilated outdoor
areas.
• Do not smoke. Do not allow sparks, naked flames or
other sources of fire to get near when filling up with
petrol or working with the machine.
• Never fill the tank indoors. Keep earthed, electri-
cally conductive objects, such as tools, away from
exposed electrical parts and wires to avoid sparking
or arcing. This could ignite petrol gases.
• Always switch off the engine and let it cool down
before refilling the fuel tank. Never remove the fuel
filler cap or fill fuel into the tank while the engine is
running or while the engine is hot.
• Do not use the product if you know there is a leak in
the fuel system. Slowly loosen the fuel filler cap to
release any pressure in the tank. Never overfill the
tank (petrol should never be above the marked max-
imum fill level). Close the fuel tank securely again
with the fuel filler cap and wipe up any spilled petrol.
• Do not use the product if the fuel filler cap is not
screwed tightly shut. Avoid ignition sources near
spilled petrol. If petrol has been spilled, do not at-
tempt to start the product. Move the product away
from the area of the spillage and prevent the forma-
tion of ignition sources until the petrol gases have
dissipated.
• Store fuel only in containers specially manufactured
for this purpose.
• Store petrol in a cool, well-ventilated area away from
sparks and naked flames or other sources of igni-
tion. Never store petrol or the product with a filled
tank in a building where petrol gases could reach
sparks, naked flames or other ignition sources such
as water heaters, ovens, clothes dryers or similar.
• Allow the engine to cool before storing the product in
an enclosed area.
• Always maintain good footing on inclines. The fol-
lowing applies to wheeled machines: Always mow
across hills i.e. never straight up or straight down.
• Take particular care when changing direction on a
slope.
• Do not run the combustion engine in closed rooms in
which hazardous carbon monoxide can collect.
• Wear work gloves and safety shoes, safety goggles,
close-fitting work clothes, and hearing protection
(PPE) while working.
• Use only cutting tools and accessories recommend-
ed by the manufacturer. Use of other insert tools and
accessories may result in injury to the user.
• A hot engine, exhaust pipe or drive unit can burn the
skin.
6. Residual risks
Residual risks and protective measures
Neglect of ergonomic principles
Negligent use of personal protective equipment
(PPE)
Careless use or omission of personal protective equip-
ment may result in serious injury.
- Wear prescribed protective equipment.
Human behaviour, misconduct
– Always concentrate fully on all work.
m Residual hazard - can never be ruled out.
Danger from noise
Hearing damage
Prolonged unprotected work with the device may
cause hearing damage.
– Always wear hearing protection as a matter of prin-
ciple.
Behaviour in an emergency
In the event of an accident, initiate the necessary first
aid measures and seek medical assistance as quickly
as possible.
The product has been built according to state-of-the-
art and the recognised technical safety rules. However,
individual residual risks can arise during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Keep your hands away from the working area when
the product is in operation.
www.scheppach.com
GB | 25
Publicidad
