Descargar Imprimir esta página

Polar DA994 Manual De Instrucciones página 4

Mostrador de doble temperatura

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
EN
Pack Contents
The following is included:
POLAR Refrigerator
Instruction manual
POLAR prides itself on quality and service, ensuring
that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your POLAR dealer immediately.
Installation
Not for use in vans or trailers, food trucks
or similar vehicles.
If the unit has not been stored or moved in
an upright position, let it stand upright for
approximately 12 hours before operation.
If in doubt allow to stand.
1. Remove the appliance from the packaging.
Make sure that all protective plastic film and
coatings are thoroughly removed from all
surfaces.
2. To optimize performance and longevity, ensure
a minimum clearance of 2.5cm is maintained
between the unit and walls and other objects,
with a minimum 20cm clearance on the top.
NEVER LOCATE NEXT TO A HEAT SOURCE.
Note: Before using the appliance for the
first time, clean the interior with soapy
water then dry well.
3. Set the brakes on the castors to keep the
appliance in position.
Operation
Storing Food
To get the best results from your POLAR appliance,
follow these instructions:
Only store foodstuffs in the appliance when it
has reached the correct operating temperature.
Do not place uncovered hot food or liquids (like
acidic fluids) inside the appliance (as it can
damage the evaporator).
4
DA994-DA995-DA996-DA997_ML_A5_v4_20231013.indb 4
DA994-DA995-DA996-DA997_ML_A5_v4_20231013.indb 4
Wrap or cover food where possible.
Do not obstruct the fans inside the appliance.
Avoid opening the doors for prolonged periods
of time.
Turn On
1. Ensure the power switch is set to [O] and turn
on at the socket.
2. Switch on the Power [I]. The current
temperature within the appliance is displayed.
Control Panel
Set the Operating Temperature
1. Press the SET button for 3 seconds. The
display will flash.
2. Press the
or
buttons to display the
required temperature.
3. Press the SET button to store the temperature.
Manual Defrost
The appliance will automatically run a defrost
cycle every six hours.
To manually defrost the appliance: Press
and hold the defrost button
to begin a manual defrost. The defrost light
illuminates.
The defrost cycle will end automatically.
Select the chiller/freezer mode
Press the mode selecting button (R/F) to select
the desired mode.
Mode
Chiller mode
Freezer mode
for 2 seconds
Display
2023/10/13 14:31
2023/10/13 14:31

Publicidad

loading

Este manual también es adecuado para:

Da995Da996Da997