Publicidad
Idiomas disponibles
Idiomas disponibles
DEVICE POWER SUPPLY INSTRUC
CONNECT AC POWER SUPPLY
1. Connect the USB cord to the AC mains inlet (not included) and the wall
outlet. The power supply is now connected and ready for use.
2. To switch the device off completely, unplug the power cord from the wall
outlet.
IMPORTANT: Unplug the USB cord from the wall outlet to protect your device
during heavy thunderstorms.
RECHARGING THE BATTERY
• This unit is supplied with a rechargeable ba ery. The ba ery dura on is 5
hours.
IMPORTANT: The ba ery compartment is not accessible by the user. It is
reserved for a er-sales service.
WARNING: Do not expose the ba ery to excessive heat, such as direct sunlight
or open-flames.
NOTE: If the unit has not been used for a long period of me, the rechargeable
ba ery may be completely discharged into a "sleep mode" condi on. This
condi on is common in all rechargeable ba eries.
For the first me charging the ba ery, make sure to charge for at least 30
minutes, but not longer than 24 hours.
IMPORTANT: Use only the supplied rechargeable ba ery.
IMPORTANT: Do not charge the ba ery with the AC/DC adapter for more than
24 hours.
TO CHARGE THE BATTERY
1. Connect the unit by USB cord and insert the DC 5V IN jack
2. Plug the adapter (not included) into an AC wall outlet.
While charging, the RADIO indicator light will illuminate and flashing,
3.
it will turn off when unit is fully charged.
4
TIONS
Publicidad
