TESY ESP32-WROOM-32 Instrucciones De Uso página 28

•
In the active screen, fill in your e-mail address and password of your
EN
TesyCloud account. Confirm the entered data.
If your e-mail address and password are filled in correctly, your appliances will
appear on the "Dashboard" of the application. If data is filled in incorrectly, the
list of connected appliances remains empty.
14. Tutorials.
With this function you have access to the User Manuals for the various Tesy
appliances.
15. Application Information.
16. Log out.
ADDING A TESY APPLIANCE TO YOUR ACCOUNT
If you have no added appliances in the MyTESY application, the list of the
connected appliances on the Dashboard will be empty.
With the MyTESY app, you can add a new Tesy brand appliance, as well as
integrate appliances from the TesyCloud app.
1. Integrating appliances from the TesyCloud app into the MyTESY app.
To manage your appliances registered in the TesyCloud application (convectors
CN03, CN04 and all models of electric water heaters with Internet control)
through the MyTESY application, complete the following steps:
1.1. From the Settings menu, select the TesyCloud option.
1.2. In the active screen, enter the e-mail address and password of your
TesyCloud account. Confirm the entered data.
1.3. If the e-mail address and password are entered correctly, your registered
appliances with the TesyCloud application will appear on the "Dashboard" of
the application. If data is filled in incorrectly, the list of connected appliances
remains empty.
1.4. In case you have forgotten your password, please use the "Forgot
Password?" function. At the e-mail address you specified, you will receive a
confirmation code and the opportunity to change your password.
2. Adding a new Tesy-branded appliance to the MyTESY application.
2.1. Press the "+" button from the Dashboard.
Read the following list of necessary requirements for the successful connection
of the appliance. Select the "Continue" button.
2.2. Select the type of appliance you want to add.
2.3. On the screen are displayed the instructions for preparing to add the
selected appliance via the control panel commands.
•
To perform the following functions, the appliance control must be switched
off (StandBy);
•
Turn on the Wi-Fi module;
Note: Whether the module is switched on is indicated by a steady Wi-Fi
symbol on the control panel.
•
Turn on the wireless network of your device;
Note: In order to prevent unauthorized access to the wireless network of
your appliance, the network is available (visible) for a period of 5 minutes
after the initial power-on or reset. If you exceed this time it is necessary to
reactivate/restart the wireless network of your appliance – see „Instructions for
use and storage" – „Factory settings reset" function.
2.4. Manually enter the wireless network name of the appliance, or scan the
QR code.
Note: The wireless network name is case sensitive.
Note: The QR code and the wireless network name are marked on a label
next to the rating plate of the appliance
Press the "Continue" button. The app automatically connects to the wireless
network of the appliance.
2.5. Select your local wireless Wi-Fi network and press the "Continue"
button.
Note: If your network is not visible in the list of networks, press the "Scan"
button to refresh the list.
2.6. Enter the password of the selected network and press the "Continue"
button.
Note: If you do not see your Wi-Fi network in the list of available networks,
you must enter it manually.
2.7. On the next screen you need to enter:
•
The profile registration e-mail address.
•
For some models, you can enter an appliance name.
•
For models where the network broadcast by the device remains accessible
after joining, you can enter a password to protect it.
Upon successful connection to your local wireless Wi-Fi network and, accordingly,
to the Internet, the Dashboard will open. Your appliance will be added to the list.
2.8. Turn on your appliance using the ON/OFF button on the control panel
of the appliance.
Note: If a connection failure message appears on the screen, check
whether the password of your local network is entered correctly or the
28
��
/QUICK START /
quality and/or availability of the Internet service.
Note: To change the name of the added appliance to a name of your
choice, click on the appliance in the list of appliance and in the screen
that opens select the "..." button. In the opened menu, select "Rename
appliance".
APPLIANCE MANAGEMENT
/QUICK START �� /
From the list of registered devices, select the device you want to
control.
A screen opens with controls that allow you to select the mode of
operation, to monitor the current status of the appliance, to make a
detailed reference of the consumed energy:
1. ON/OFF control
2 Manual control
3 Weekly programmer mode
4 Eco Smart Mode
5 Eco Comfort Mode
6 Eco Night Mode
7 Vacation Mode
8 Boost function
9 Additional settings
10 Dashboard
1 To be able to operate you device, it must be switched on .
1.
2 Manual operation mode
2.
Manual
Using slider on the right, you can manually set the degree to which you
want the water in the water heater to be heated. During heating the
message "HEATING" will appear on the screen. When the appliance has
reached the set value the message "READY" will appear on the screen.
3 Weekly programmer mode .
3.
Manual
T
he appliance you have purchased is with three built-in weekly program modes.
Each of these modes is a weekly schedule for operation of the electric water
heater where the desired temperature of the water is set for each hour of the
day and the night, and for all days of the week. The programs can be changed
according to your preferences and habits.
3.1. To set your device in program mode P1 or P2 or P3, press the "Activate"
button.
3.2. Adding/Editing the settings of "Weekly programmer" mode is done
by the "Edit" button. In this menu, you have the opportunity to create a work
schedule for each program and change it if necessary.
Add a program for a day of the week:
A new window opens, which allows for:
Choice of day of the week;
1.
Option to copy the current settings for all days of the week;
2.
"Add program" - selection of time range and temperature setting.
3.
3.3. Time range selection and temperature setting:
A new window opens that allows you to:
In the "From" field, set a start time;
1.
In the "To" field, set an end time;
2.
Temperature selection using the slider
3.
Save the settings with the "Save" button.
4.
Program modes - P1, P2 and P3
You can choose which day of the week, for what period of time the appliance
should be turned on and what amount of hot water it should provide. The
appliance turns on and off at the precisely set time.
Programs P1 and P2 on Bellislimo models
You can choose on which day of the week, at what time, what amount of hot
water is needed. The appliance calculates when to turn on to provide the
required amount at the time you set.
Example:
If it is set to have hot water for 3 showers on Wednesday at 18:00, the unit will
maintain this amount for a certain period of time and turn off.
4. 4 "Eco smart " mode.
In "Eco smart" mode the electric water heater elaborates its own algorithm for
operation so as to ensure energy saving, and therefore, to reduce you electricity
bill and at the same time to keep the comfort in your home while it is being used.
Eco smart – Your TESY electric water heater is of the highest energy class. The
class of the appliance is guaranteed only when it operates in ECO mode due to
the significant energy savings that are generated.
Eco Comfort – Eco Comfort mode of operation is intended for users with
P1 P2 P3
P1 P2 P3