Proline VCB700AA Manual De Instrucciones página 13

TROUBLESHOOTING
Please check the following details before you have your appliance
repaired by an authorised servicing agent.
Problem
Vacuum cleaner
does not work.
Suction power
becomes weak.
Power cord will
not fully
feedback.
Power cord
cannot be pulled
out.
SPECIFICATIONS
Ratings: 220V-240V~ 50/60Hz
700W
Possible Cause
1. Check if the power
plug is firmly
inserted into the
power outlet.
2. Check if the power
button of the
appliance is pressed.
1. Check if the hose,
brush or tube is
clogged or damaged.
2. Check if the dust
tank is full.
3. Check if the filter is
clogged, the tube is
correctly attached.
Check if the power
cord is twisted.
The power cord may
be twisted.
Possible Solution
1. Insert the plug back
into the power outlet
and ensure it is
switched on.
2. Press the power
button to turn on the
vacuum cleaner.
1. Immediately remove
the obstruction.
2. Empty the dust tank.
3. Clean the filter or
reassemble the
tubes.
Pull out the power cord
at its optimal length and
rewind it.
Rewind or pull the cord
in and out several times
by pressing the cord
rewind button.