IKEA LAGAN Manual De Instrucciones página 30

ENGLISH
Symbol
there is no gas supply / off
position
Daily use
Warning! Refer to Safety
chapters.
Ignition of the burner
Always ignite the burner before
you place the pots or pans.
To ignite the burner:
1. Push the control knob and turn it
anticlockwise to the maximum position
marked with
2. Keep the control knob pushed for about
5 sec. As a result thermocouple heats up,
and the safety device switches off. If you
do not push the knob, the gas supply is
interrupted.
3. When you light the flame, you can adjust
it.
If the burner does not ignite, after
a few attempts, check if the crown
and its cap are in correct
positions.
Description
.
Symbol
there is maximum gas sup‐
ply / ignition setting
there is minimum gas sup‐
ply
to show the position of the
burner
1 Burner cap
2 Burner crown
3 Ignition candle
4 Injector
5 Thermocouple
Warning! Do not keep the control
knob pressed for more than 15
seconds. If the burner does not
light after 15 seconds, release the
control knob, turn it into off
position and wait for at least 1
minute before trying to light the
burner again.
30
Description
1
2
3
4
5