beamUP UTXBU Guía Rápida

Marque Variante Fréquence Code
Marca Variante Frecuencia Código
Brand Variant Frequency Code
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Access Master®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
beamUP™ 315/390 2-1-1-4
BFT® 433.92 1-4-1-2
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Build Mark®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Chamberlain®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Craftsman® Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Other 3 303 2-1-2-1
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Garage Access®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Variant 1 315 1-2-1-1
Genie®
Variant 2 390 1-1-4-4
303/390 2-1-2-1
Guardian®
433.92 1-4-4-3
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
LiftMaster®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Megacode 1 310 1-3-3-1
Linear® Megacode 2 318 1-3-3-2
HCS 433.92 1-4-2-3
Red/Orange 390 1-2-4-4
Yellow 315 1-3-1-2
Green 390 1-4-1-4
Master Mechanic®
Purple 315 1-2-4-3
Other 1 433.92 1-3-1-1
Other 2 433.92 1-4-3-4
Masterforce 303 2-1-2-1
Similo 433.92 1-2-2-2
Nice®
Flors 433.92 1-3-4-3
Variant 1 315 1-2-1-1
Overhead Door
Variant 2 390 1-1-4-4
Performax® 303 2-1-2-1
Curtains 433.42 1-3-3-4
Somfy®
Garage 433.43 1-3-4-1
Sommer® Variant 1 434.4 1-1-1-4
Variant 1 303/372 2-1-1-1
Wayne Dalton®
Variant 2 433.92 2-1-1-3
Xtreme Garage® 303 2-1-2-1
For information and help call
1-888-323-9782
Beam Labs LLC
1761 International Pkwy, Ste 113
Richardson, TX 75081
www.beamlabs.io
Compatible with/ Compatible avec
Compatible con
Other Regions/Autres régions/Otras Regiones
Marque Variante Fréquence
Marca Variante Frecuencia
Brand Variant Frequency
ACM® 433.92
Allmatic 433.92
Aprimatic 433.92
ATA® 433.92
Avidsen 433.92
Rolling 433.92
Beninca
ARC 433.92
Came® 433.92
Cardin® 433.92
Centurion 433.92
Clemsa 433.92
DEA 433.92
Ditec® 433.92
Doorhan
433.92
Ecostar 433.92
433 433.92
Erreka
868 868
Variant 1 433.92
FAAC® Variant 2 433.92
Variant 3 868
Variant 1 433.92
Genius Variant 2 433.92
Variant 3 868
Gibidi 433.92
Hormann® 868
Key 433.92
King Gates 433.92
M832 433.92
Merlin
Plus 433.92
2.0 Plus 433.92
Mhouse 433.92
Mutancode 433.92
Novoferm 433.92
O&O 433.92
Peccinin 433.92
Prastel 433.92
Yellow 433.92
Pujol
Vario 433.92
Rossi 433.92
Sea 433.92
Seav 433.92
Sommer® Variant 2 868
If model not listed
1-888-323-9782 Si le modèle n'est pas répertorié
Si su modelo no aparece en la lista.
Replacing battery/ Remplacement de la batterie
Remplazo de la bateria
When the battery of the Remote Control is low, indicator light will become
dim and/or the range of the Remote Control will decrease. To replace the
battery, pry open the Remote Control using a small screwdriver. Replace
with a CR2032 battery. Snap the housing back together.
Lorsque la pile de la télécommande est faible, le voyant s'atténue et/ou
la portée de la télécommande diminue. Pour remplacer la pile, ouvrez la
télécommande à l'aide d'un petit Tournevis. Remplacez par une pile CR2032.
Remettez le boîtier en place.
Cuando la batería del control remoto está baja, la luz indicadora se atenuará
y/o el alcance del control remoto disminuirá. Para reemplazar la batería,
haga palanca para abrir el control remoto con un pequeño destornillador.
Reemplácela con una batería CR2032. Vuelva a unir la carcasa.
PCB
Coin Cell
Battery Holder
Battery
Code
Código
Code
1-1-1-3
1-1-1-2
1-1-2-3
1-1-2-2
1-2-4-1
1-2-4-2
1-4-1-3
1-4-2-1
1-1-2-4
1-4-2-4
1-4-1-1
1-1-3-1
1-3-3-3
1-1-3-2
1-1-3-3
1-1-3-4
1-1-4-1 Model UTXBU
1-1-4-2
1-3-1-3
Universal
1-3-1-4
1-1-4-3
4-Button Remote Control
1-3-2-1
1-3-2-2
1-2-1-2
1-4-2-2
www.beamlabs.io
1-2-1-3
1-3-2-4
1-2-1-4
1-3-1-1
1-888-323-9782
1-3-4-2
1-2-2-1
1-1-1-1
NOTE:
1-2-2-3
The garage door opener will operate
1-3-4-4
during programming. Ensure that
1-2-2-4
safety photo-eyes have been installed
1-4-3-3
and working properly, and people and
1-2-3-2
obstructions are clear of the garagedoor
1-2-3-1
opening.
1-4-3-1
1-2-3-3
1-2-3-4
This remote is not compatible
1-1-2-1
with dip-switch receivers.
1. Press and hold buttons 1
and 4 simultaneously until
the LED begins flashing.
1 2
3 4
WARNING:This product can expose you to chemicals that are known to the State of California to cause
cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
beamUP and beam favicon are trademarks of Beam Labs, LLC.
All other trademarks and brands listed are the property of their respective owners.
For additional information, including warranty, please visit: www.beamlabs.io
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. FCC Part 15.21 Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
To prevent possible SERIOUS INJURY or DEATH:
- Keep remote control and battery out of reach of children.
- NEVER permit children to access the Universal Remote Control.
- Operate the door ONLY when it is properly adjusted, and there are no
obstructions present.
- ALWAYS keep a moving door in sight until completely closed. NEVER
cross the path of a moving door.
To reduce risk of fire, explosion or electric shock:
- DO NOT short circuit, recharge, disassemble or heat the battery.
IMPORTANT PROGRAMMING INSTUCTIONS
1. Identify brand of your opener
and variant. Find corresponding
code in the compatibility table.
2. Press and hold buttons 1 and 4
simultaneously until the LED
begins flashing. Release buttons.
NOTE: LED will turn off.
1 2
3 4
4. Press the button you wish to use for
this opener. The LED will briefly turn
solid.
1 1 2
3
4
Erase a programmed button step-by-step
2. Enter 3-3-3-3. When 3. Press the button you
finished, the LED will wish to erase. The LED
flash rapidly. will briefly turn solid.
1 1 2
1 2
3 4 3 4
2024 Beam Labs LLC
WARNING
3. Enter the four digit code corresponding
to your garage door opener. When
finished, the LED will flash rapidly.
1 2
3 4
5. Your remote is paired BUT NOT
YET PROGRAMMED. Program
your remote using the garage door
opener's "Learn"button or follow the
garage door opener instructions for
programming a new remote control.
1 1 2
3 4
4. The code stored on this
button is now erased and
should no longer control the
device when pressed.
1 1 2
3 4
Made in China
REV 0124