Publicidad
Idiomas disponibles
Idiomas disponibles
* Clean with the brush.
Be careful not to apply too much
force on the blade.
Remove the hair that is caught on
the front of the trimmer section by
lifting the trimmer.
Do not disassemble
the outer
blades or frames.
* Wipe the attachment area with a
dry cloth.
* After cleaning, put the bikini comb
on the shaver head.
Replacing the outer foil of
the shaver head (Fig.10)
Never
remove
the outer foil for
other reason than to change it.
Removing the outer foil
While pushing the outer foil gently
with the fingers, use the fingernail
to release the plastic panel © on
the blade from the catches (2) on
the inside of the frame.
Fitting the new outer foil
Holding the outer foil so that the
surface with the plastic panel ©
(i.e. the surface that will contact the
inner blade) faces upward, insert
into the frame so that the catches
(a) on the frame fit into the holes on
the foil.
We recommend
that the outer foil
be replaced every year and the
inner blade be replaced every two
years.
14
Safety precautions
* Use only the included charger.
e Please use the appliance at a
temperature of between 5~40°C
(41-104F").
e Always ensure the appliance is
operated on an electric power
source
matched
to its rated
voltage.
Never operate the appliance if
the cord or adapter are damaged
or overly hot, or if the plug fits
loosely in the power outlet.
Keep the device away from sources
of heat or flame.
Not for use by or on children or
invalids. Close supervision
is
necessary
when
used
near
children or invalids.
Do not allow the appliance to
be left in the vicinity of sinks,
bathrooms, or other high-humidity
areas, where it could be exposed
to water and moisture.
Do not modify the cord or damage
it in any way such as by bending,
twisting or pulling on it unnecessarily.
Do not wrap the output cord tightly
around the appliance.
Regularly clean the cord connector,
which plugs into the appliance,
to keep it free of dust and foreign
objects such as pins, etc.
Replace the shaving foil and the
inner blade when you notice a
reduced shaving performance.
A damaged or defective appliance
should be returned to the custom-
Publicidad
