Publicidad
EN Functions & Settings
01 First use
Icons
on the main display light on for a couple of seconds and a warning tone is emitted when
appliance is plugged in.
Then the plug icon
To start the appliance, press ON/OFF button
It will operate under high power setting (2000W), the screen displays "HI" and the Default setting
temperature is 23°C.
When the appliance will start again, the last mode recorded is used.
02 Standard Use / Function setting
To start the appliance, press ON/OFF button
Press on Function button
- eco - C1"
•
C1 :
Fan only
•
HI :
High power 2000W (T° can't be set)
•
Lo :
Low power 1200W (T° can't be set)
•
eco + set Temperature :
Adjustable temperature starts under high power. Appliance will switch to low power once ambient
temperature is closed from set temperature and keep on low power once temperature is reached.
03 Temperature setting in eco mode
Temperature can be set by pressing "+" or "-", with a setting range of 5-35°C. When the setting temperature
is reached (temperature icon will flash
lower than the set temperature, the machine will restart.
04 Swing function
When the appliance is under operating mode, "swing" button
can be stopped by pressing again this button.
05 Short-circuit and open-circuit protection function of
temperature sensor
If temperature sensor has short circuit or open circuit, regardless of the mode, the digital screen will display
"E2" or "E1" and be illuminated.
At this time, the operation of any button is invalid, and the buzzer will ring for 10 times.
06 Safety protection
When appliance is under standby mode or under working mode, if the ambient temperature is higher than
50, the system will turn off all the outputs, the digital screen will display "FF" and will flicker for 75 times at a
frequency of 1 time/second. At this time, pressing of any button will not work, and the protection can only be
withdrawn after the power is cut off.
5059340471983_MNL_IN_V04.indb 26
5059340471983_MNL_IN_V04.indb 26
light stays on when the appliance keep connected to main supply
; the heater will switch in a cycle of "high power (2000W) - low power (1200W)
), the fan heater will stop the operation ; when the temperature is
can be pressed to start swing function; it
26
06-06-2022 10:04:45
06-06-2022 10:04:45
Publicidad
