MoMi VENKO Manual página 6

• Install the booster in such a way that no hard parts or plastic parts of the product can be trapped by
the sliding seat or vehicle doors under normal vehicle operating conditions.
• Installation should be performed by an adult.
• Check that the lap belt runs low and thus holds the pelvis.
• There is a danger associated with any modification or installation of additional components to the
product without the approval of the type approval authority.
• There are dangers associated with not following the installation instructions provided by the booster
manufacturer.
• Never leave a child in an enhanced booster without adult supervision.
• Luggage or other objects in the vehicle that may cause injury in the event of an accident should be
properly restrained.
• Make sure that the seat belts fit the child correctly, fit snugly and are not twisted.
• We recommend keeping this manual in the glove box of the vehicle.
NOTICE:
This is a Universal booster cushion Enhanced Child Restraint System. It is approved according to UN
Regulation No.129, for use in i-Size compatible and universal vehicle seating positions as indicated by
vehicle manufacturer in the vehicle user's manual. If in doubt, consult the Enhanced Child Restraint
System manufacturer or the retailer.
APPLICATIONS:
The product is designed for children from 135cm to 150cm tall and weight a maximum of 36kg. The safest
place to install the product is the rear seat of the car. Riding in the front seat is allowed only in seats with
the front airbag deactivated.
PRODUCT COMPONENTS:
1. Base
2. Belt guide
3. ISOFIX guides
ASSEMBLY:
1. Find ISOFIX attachments between the base and the backrest - refer to your car's owner's manual.
2. Press the button releasing the lock and take the ISOFIX forward as far as possible.
3. Press ISOFIX attachments into to ISOFIX attachments point. You will hear a loud click and you will
see a green symbol on the ISOFIX button when the lock is active. Repeat the other side.
4. The car seat should be located as close to the backrest of a seat of a car as possible. Grab the seat to
make sure that it is correctly attached.
ATTENTION: Make sure that the ISOFIX lock on both sides is marked as active.
ATTENTION: If the car seat does not cling to the seat and ISOFIX attachments are taken out of their
guides, the steps above have to be repeated.
6 EN