Publicidad
Idiomas disponibles
Idiomas disponibles
Don't immerse appliance in water or liquids. In any case,
avoid splashing of water or liquids.
Always close the lid before each operation
Put the appliance on stable shelves and floors.
Do not insert any metal object into the product. Remove
the whisk, only after having turned off the appliance and
unplugged it from the main power outlet.
To avoid milk to stuck on container, at the end of each
use, immediately rinse the container with water.
DESCRIPTION G10022
1 Lid
3 Main body
OPERATING THE UNIT
-
Pour the milk into the container, making sure to stay within the limits of the capacity which is indicated
on the appliance itself (MIN - MAX). The symbol
working level if you want to froth milk (200 ml); the symbol
you just want to heat milk (300 ml).
-
WARNING: if you exceed the maximum specified levels, the milk will come out from the container
during use.
-
Press the button
rotate. Once finished, the appliance will turn off automatically.
-
Pressing the button
will automatically turn off.
-
You can stop the machine anytime, by simply pressing again the operation button.
-
If you only want to heat the milk, remove the whisk from the base of the container. WARNING: this
operation can be performed only if the product is switched off and unplugged from the power supply and
when all the parts are completely cold. To heat the milk, simply press the button
appliance turns off automatically.
To avoid milk to stuck on container, at the end of each use, immediately rinse the container with water.
CLEANING
Unplug unit and wait until the complete cooling down of each part before starting cleaning operations.
Do not immerse the base of the vessel and into the water. In any case, avoid splashing water or other liquids
from reaching those parts. Do not use abrasive cleaners, solvents, or strong detergents to clean the exterior
and the base of the product, but clean with a cloth dampened with warm water. To clean the inside of the
appliance, wait for the cooling and rinse with cold water to remove residues and impurities.
To avoid the milk to stuck on container, at the end of each use, immediately rinse the container
with water.
SAFETY SWITCH-OFF
The safety device is triggered if the appliance operates without any milk inside the container. To avoid
overheating, the unit is automatically turned off after a few seconds and it cannot be activated until the
complete cooling of the electric resistance.
2 Whisk
4 Operation buttons
to heat and froth milk. The red light button will turn on and the whisk will begin to
allows you to only froth fresh milk, without heating it. Once finished, the product
5 Electric base
placed inside the container indicates the maximum
shows the maximum operation level if
and wait until the
10
Publicidad
