Machine Weight (Bare Tool)
**X may be followed by one or two characters. All
models are the same except model number and
trademark.The suffix in models may be number from
"1" to "999" or English letter "A" to "Z" or "M1" to" M9"
which means different package or the various of
accessories packed in the package.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES
AND CHARGERS
Category
Model
WA3669
20V Battery
WA3674
WA3742
20V Charger
WA3881
AC Adapter
ZD012A216050US
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4.INTENDED USE
The machine is intended for household cleaning or
similar purposes.
5.OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Assembling the machine
NOTE: Make sure the machine is
locked into place before operation.
Connecting the Pet Brush/Dusting
Brush/Crevice Tool
20V Cordless Stick Vacuum Cleaner
Install the Battery Pack to supply
4.63 lbs (2.1 kg)
power to the Vacuum Cleaner.
After using the machine , please
press the Battery Release Button,
then remove the Battery Pack.
OPERATION
ON/OFF
Press the On/Off button to turn the
vacuum on low mode. Press the
On/Off button again to turn off the
vacuum.
NOTE:Please do not use a vacuum
cleaner to vacuum hot objects such
as carbon, cigarette butts, etc.;
liquid substances; sharp objects
such as broken glass; ultra-fine
substances such as lime, cement,
Capacity
flour, etc.; corrosive liquids such as
2.0 Ah
disinfectants, acidic and alkaline
cleaning agents, laundry detergents,
4.0 Ah
etc.; flammable and explosive items
such as gasoline, alcohol, etc.
0.4 A
Otherwise, it may cause damage to
the machine or accidental fire leading
2.0 A
to personal injury.
0.5 A
Adjusting the speed
Press the Speed Control Button to
choose the speed mode.
LED light
When the machine is working, the
LED Light will be on.
AFTER OPERATION
Empty the dustbin after each use.
NOTE: Please clean the dustbin
before the debris inside reaches the
MAX line.
Cleaning the dustbin
Press the release button to
completely remove the dustbin.
Remove the filter from the top and
pull out the cyclone. You can rinse
the dustbin with water. Ensure it is
completely dry before reassembling.
Cleaning the Brush Roll
FIGURE
Press the brush roll release button
on the bottom of the floor nozzle
to access the brushroll. Pull out the
brush roll and untangle any hair.
See Fig. A1
You can also rinse it with water. It is
recommended to clean the brushroll
once a month.
See Fig. A2
See Fig. B
See Fig. C
9
See Fig. D
See Fig. E1
See Fig. E2
See Fig. E3
EN