Replace The Input Filter - Orbio 5000-Sc Manual Del Operario

REPLACE THE INPUT FILTER

Replace the input filter when the Service input
filter indicator illuminates.
1. Turn off the water supply to the 5000--Sc.
2. Press the Pressure release button to release
the water pressure inside the input filter
assembly.
3. Use the filter wrench to remove the input filter
housing from the bracket.
5000- -Sc DM20001 (2- -12)
Home
4. Remove the input filter from the input filter
housing and discard the filter.
5. Insert the new input filter into the input filter
housing and tighten the input filter housing
back onto the bracket.
H O
2
6. Turn on the water supply to the 5000--Sc.
7. Check for leaks around input filter housing
seal.
8. Press the Reset button / Indicator. Allow the
system to generate solution.
9. The 5000--Sc is ready for use when the Power
/ Generating indicator is flashing or stays
illuminated.
Find... Go To..
OPERATION EN
13