cecotec PUMBA 6000 PURRFECT MEAL SMART VISION Manual De Instrucciones página 24

ENGLISH
Warning
Do not use canned or wet food.
Please note
If your pet has not eaten the previously scheduled meal, reduce the dose of the next meal.
5. CLEANING AND MAINTENANCE
- Both the feeder and the desiccant bracket can be removed for cleaning.
- Use a damp cloth to wipe dirt from inside the feeder and from the dispensing outlet.
- Rinse the parts and air dry them thoroughly before putting them back into the appliance.
Important
- For the sake of your pet's health, it is recommended to clean the feeder regularly.
- The washable parts of the feeder are: food tank, stainless steel bowl, plastic bracket, lid
(without desiccant bag).
- These parts can also be put in the dishwasher or immersed in water.
6. TROUBLESHOOTING
1. Why am I having problems pairing the device to my mobile phone?
- Check that the device is working properly. To do this, look at the colour and status of the
indicator light. If it is flashing blue or steady blue, it is connecting to the Wi-Fi.
- Check if the feeder is connected to the Wi-Fi. Search for the Wi-Fi signal of the feeder on
the mobile phone and check if there is a signal.
- Uninstall the app and reinstall it. Accept localisation permissions during installation.
- Check if the router has a restriction on the number of connected devices. It is recommended
to protect the network with WPA/WPA2 PSK. Remember to use the 2.4 Ghz network only.
2. How do I reconnect the device to the Wi-Fi network quickly after disconnecting it?
Exit the app, log back in, and wait for the data to be updated.
3. Why can't I log in with my account?
- Make sure the network is working and check if you are already logged in to your account
from another mobile phone.
- Remember to erase the device from the mobile phone if you want to use another phone to
control the feeder.
46 PUMBA 6000 PURRFECT MEAL SMART VISION
Problem Possible cause
Feeder does not Clogged food in the
1 dispense food mechanism
Food spills out of the Unbalanced or unstable
2 feeder feeder
Low battery indicator
3 light on No battery
4 Feeder makes strange Loose or worn parts
noises
5 The feeder does not Electrical or electronic
work problem
Moist or sticky food Moisture in the storage
6 area
Lid not closed properly
7. TECHNICAL SPECIFICATIONS
Product reference: 09566
Product: Pumba 6000 Purrfect Meal Smart Vision
Suitable for: All types of small-medium sized pets
Rated voltage: 5V 1A
Product power: 5 W
ENGLISH
Solution
Check for obstructions
and clear them.
Make sure the food is
dry and loose.
Place the feeder on a
level surface.
Check if the parts are
correctly assembled.
Replace the batteries
with new ones.
Use quality alkaline
batteries.
Inspect and tighten
loose parts.
Replace worn parts.
Contact Technical
Support Service
Place the feeder in a dry
place.
Store the feeder indoors.
Check that the lid is
properly fitted.
PUMBA 6000 PURRFECT MEAL SMART VISION 47