10. WHAT IF THERE ARE PROBLEMS?
Problem
No mist is being
emitted from the
device.
Only a small
amount of mist
is being emitted
from the device.
The LED of the
Mist/timer button
is illuminated
and the device is
running, but no
mist is emitted.
If you cannot find a solution to your problem here, contact our Customer Services.
11. TECHNICAL DATA
Product name
Supply
Water tank capacity
Room size
How it works
Mist settings
Running time
Timer duration
Weight
Dimensions
Average active efficiency
Cause
Mains adapter is not
plugged in.
There is not enough water
in the water tank.
There is too much water in
the water tank.
Ultrasonic vaporiser is
blocked.
The outlet in the porcelain
cover is blocked.
Condensation is blocking
the ventilation opening in
the water tank.
LA 40
Input: 100 – 240 V, ~50/60 Hz, 0.4 A max
Output: 24.0 V
180 ml
Up to approx. 20 m
Ultrasonic atomiser
Continuous mist and intermittent mist
approx. 9 hours of continuous mist
approx. 18 hours of intermittent mist
1 hour, 3 hours, 7 hours, continuous operation
LA 40: approx. 508 g,
Adapter: approx. 80 g
Ø 129 mm x 167 mm
≥ 83.13 %
Solution
Insert the mains adapter into a
suitable socket.
Fill the water tank up to the
"MAX" marking.
Pour away excess water from the
water tank until it only reaches
the "MAX" marking.
Clean the ultrasonic vaporiser as
described in the "Cleaning and
maintenance" chapter.
Check that the outlet in the por-
celain cover is not blocked.
Open the ventilation cover and
remove the condensation at the
ventilation opening.
0.5 A, 12.0 W
2
29