ELECTRICSUN ESvapor60 Manual De Instrucciones página 2

1. Control of functions from the control panel
GEARS – Flame speed/size (1-5)
Press this button to change the speed and height of the "flame". The flame has 5 intensity levels
WATER INLET – Fill water tank
Press the POWER button to turn on the device. The device notifies you vocally that you need to fill the water tank.
Attach one end of the supplied hose to the tank fill valve (B) and insert the other end into the water container and press
the WATER INLET button. The machine will start drawing water. When the tank is full, the device automatically stops
the water supply. We recommend using distilled/filtered water to avoid limescale. The machine will notify you when
there is not enough water left in the tank to operate.
DIMMER – Flame colour change
Press the DIMMER button once to change the flame colour: lilac, red, green, blue, yellow, purple, turquoise, orange,
auto cycle. The flame is in "Auto Cycle" when the DIMMER button flashes. In the automatic cycle, the colours alternate
approximately every 2-3 minutes.
WATER OUTLET – Drain water tank
If you want to empty the water tank, DO NOT TURN ON THE DEVICE. Attach the supplied hose to the tank drain valve
(A) and press the WATER OUTLET button 3 times quickly. After the machine finishes automatic emptying, use the safety
valve on the lower right side to manually empty all the water in the tank.
TIMER – Timer
Press this button to schedule the machine to turn on or off automatically. Each press of the TIMER button corresponds
to a time interval of 0.5 hours (30 minutes). Each time you press the button, the programmed interval will be displayed
on the screen.
POWER – Turn on/off
Press this button to turn the device on or off.
2. Control of functions from the remote control
www.ElectricSun.de
CHILD LOCK – Safety lock
Press this button if you want to lock the control panel keys
POWER – Turn on/off
Press this button to turn the device on or off.
DIMMER – Flame colour change
Press the DIMMER button once to change the flame colour: lilac, red, green, blue, yellow,
purple, turquoise, orange, auto cycle. The flame is in "Auto Cycle" when the DIMMER
button flashes. In the automatic cycle, the colours alternate approximately every 2-3
minutes.
IN - Fill water tank
Press the POWER button to turn on the device. The device notifies you vocally that you
need to fill the water tank. Attach one end of the supplied hose to the tank fill valve (B)
and insert the other end into the water container and press the IN button.
The machine will start drawing water. When the tank is full, the device automatically
stops the water supply. We recommend using distilled/filtered water to avoid limescale.
The machine will notify you when there is not enough water left in the tank to operate.
OUT – Empty the water tank
If you want to empty the water tank, attach one end of the supplied hose to the tank
drain valve (A) and the other end to the container where you want the water from the
tank to flow. DO NOT TURN ON THE DEVICE. Press the OUT button 3 times in quick
succession. After the machine finishes automatic emptying, use the safety valve on the
lower right side to manually empty all the water in the tank.
SOUND – Sound on/off/volume
Short press once to turn on the sound that imitates fire and once to increase the volume.
Long press once to mute.
TIME – Timer
Press the "+" and "-" buttons on the left side of the remote control (next to the text
"TIME") to set a time interval of 0.5 hours (30 minutes) for the device to turn on/off. Each
time you press the buttons, the programmed interval will be displayed on the screen.
GEARS - Flame speed/size (1-5)
Press the "+" and "-" buttons on the right side of the remote control (next to the text
"GEARS") to change the speed and height of the "flame".
The flame has 5 intensity levels. Water consumption depending on the level
0.08~0.8L/hour.
E-mail: office@electricsun.de
A. Drain valve (OUT – on the
left)
B. Fill valve (IN – on the
right)
pag. 2