MACHENIKE G3S Manual Del Usuario página 4

Wired Connection
1, In a powered-off state, connect the device and controller using the
provided data cable to use it, plug and play.
Supports connection with Windows, Switch, Android, and PlayStation 3. Note that Switch
*
compatibility is exclusive to the wireless version.
When connecting to a Switch, you must enable wired controller functionality in the settings
*
and plug the Switch console into the official multi-functional dock.
G3S does not possess functions beyond those outlined in the manual. Some software that
*
can be used on a PlayStation 3 console may not be compatible with G3S.
TURBO Function
Buttons that support TURBO:
Manual TURBO Function:
button, you need to hold down A manually to trigger it.
To activate the TURBO Function:
manual TRUBO(rapid-fire mode) for the A button. To deactivate TRUBO
(rapid-fire mode), press FN+A again.
For a button that has activated the TURBO function, the status indicator light will continue
*
to flash when pressed.
Controller Battery Indicator (Wireless Version)
Controller Power Status
Full Battery
Low Battery
Battery too low
Charging(below 25%)
Charging(above 25%)
Charging Complete
Caution! Do not use a power source exceeding 5V 1A to
charge the controller to avoid potential damage.
A/B/X/Y/LB/LT/RB/RT
When the TURBO feature is activated for the A
Hold FN+A and release it; this enables
Indicator Light Status
——————
——————
——————
——————
——————
——————
Solid Ice Blue
Solid Red
Flashing Red
Red light flashes slowly
Ice blue light flashes slowly
Solid Ice Blue for 30 seconds, then turns off.