Publicidad
Idiomas disponibles
Idiomas disponibles
TABLAS · TABLES · TABELAS ·
Problem
Dishwasher does not drain water
Dishwasher water leakage
problem
There is foam in the dishwasher
The dishwasher is dirty
A white film is visible on the
bottom of the dishwasher.
The dishwasher does not clean
properly
Utensils have scratches/white
marks
Dishwasher makes noise inside
the machine
Problema
Lava-louças não liga
A máquina de lavar loiça não
inicia a limpeza
O lava-louças não bebe a água
14
Solution
Check the filter, it may be blocked.
Check pipe connections, this could be an installation fault.
Check pipe connections, this could be an installation fault.
Check the water inlet and outlet pipes, they may be leaking.
A non dishwasher-safe detergent may have been used. Pour
a litre of water into the machine, close the lid and set the
machine on a fast cycle. The soap should dissolve and drain
with the water.
You may have loaded utensils with a large amount of
encrusted food. Drain the dishwasher and remove this dirt
with a cloth and the machine's own detergent.
If the water contains large amounts of salt or lime, deposits
may form on the bottom of the dishwasher. Drain the
dishwasher and remove this dirt with a cloth and the
dishwasher's own detergent.
Utilice una cantidad correcta de detergente. Use correct
amount of dish soap.
It is possible that some of the elements may cover other
elements and make them difficult to clean.
Fill the appliance correctly; incorrect positioning or too
many utensils makes cleaning difficult.
The water in your area may be too hard. Reduce the amount
of dish soap.
Check that there is enough salt in the salt tank and refill it.
Some utensils may be blocking the movement of the blades.
Position the utensils correctly
Check that nothing has fallen to the bottom. Wear gloves
when removing them as the water temperature may be high.
Solução
Verifique se o cabo está conectado à rede.
Verifique se a corrente voltou após a instalação do aparelho.
A porta deve estar fechada para que o programa comece.
Verifique as conexões dos condutos, pode ser uma falha de
instalação.
Comprove que a toma de água está aberta.
Publicidad
