Niagara N2945CH Instrucciones Para La Instalación

Handheld Showerhead Installation Instructions
NO TAPE NEEDED, INSTALL BY HAND
Note: Some shower arms are formed with a ball where the head connects. We suggest that you either replace
this type of arm or use an adapter, which can be found at a hardware store, plumbing or home center.
(1) Remove old showerhead from the shower arm by turning it counter-clockwise. 1 >
(Y
S
(2) Before installing the new showerhead, clean the shower arm
threads, then turn on the water to wash out the pipe.
(3) TURN OFF WATER. Check that screen washer is seated firmly
into the holder. Attach the holder to the shower arm by turning D)
it clockwise by hand until tight. DO NOT OVERTIGHTEN.
4
(4) Check that the screen washer is seated firmly into the swivel hose
nut with backflow preventer and attach to holder by turning it
by hand, clockwise to the holder. DO NOT OVERTIGHTEN.
D
(5) Place one rubber washer into the swivel hose nut then attach to Z
handle. Tighten it by hand until its snug. DO NOT OVERTIGHTEN. 5
(6) Tighten all fittings and the showerhead is ready to use.
To clean — unscrew showerhead and remove foreign particles.
Soak nozzle in hydrogen peroxide or vinegar.
CAUTION: Unexpected and sudden temperature changes can occur when another water appliance is turned on while the
shower is being used. Do not use other water appliances such as clothes washers, dish washers, or toilets while the shower
is in use.
NOTE TO INSTALLER OF SHOWERHEAD: Leave showerhead packaging and warning for end user.
*SAVING DETAILS: Water savings is based on the difference in usage between this water-efficient showerhead and a standard 2.5 gallon per minute showerhead.
*LIMITED LIFETIME WARRANTY: Niagara Conservation warranties to the original purchaser of this product that it is free from defects in material and
workmanship for as long as the original purchaser owns the product. Niagara Conservation will at our choice replace any part of the product which is in our
opinion defective provided that the product has not been abused, misused, altered, or damaged after its purchase. This includes damage due to the use of
tools or harsh chemicals. In the event a product has been discontinued, Niagara will replace it with what we determine to be the closest product. Niagara
Conservation is not responsible for labor charges, installation, or other consequential cost. Niagara Conservation's responsibility shall not exceed the original
cost of the product. Save your receipt as proof of purchase is required for warranty action.
CONS ERE ATE ONS Customer Service 800-831-8383
4200 Diplomacy Road | Forth Worth, TX 76155 L9620CH-HH-INST-01