Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
• Clean the lint filter after each load. Otherwise, the drying performance may decrease.
• If the filter surface is wet, allow it to completely dry before use.
-
Inserting the filter while it is wet may lead to the development of mold, unpleasant odors, or
resulting in less efficient drying.
• When cleaning or removing the lint filter, do not shake or tap on the filter. Doing so can damage the
filter.
• Opening the outer and inner filters carelessly and with excessive force can damage the filters.
NOTE
Water droplets can form around the heat exchanger because of condensation caused by a temperature
difference. This is normal and is not a sign of a leak.
Recovery from freezing
The Laundry Combo may freeze when the temperature in its location drops below 32 °F (0 °C).
1. Turn off the Laundry Combo, and then unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and then soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the Laundry Combo still doesn't operate normally, repeat the steps above.
Untitled-8 75
5. Put the inner filter into the outer filter in the correct
direction.
6. Insert the assembled lint filter back into the place.
English 75
2024-03-21
5:39:18
Publicidad
