Sig Sauer KILO5K Manual Del Usuario página 30

4. Unit of Measure Selection (Y or M)
Your current selection will be flashing (Yards is default). You can toggle between Y or M by
pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the
MODE button which will save your setting and index to the next setting for configuration. If you
do not press and release the MODE button the rangefinder will save your selection and turn off.
5. Ballistic Group Selection
Your current selection will be flashing (grP1 is default). You can toggle between a custom
ballistic profile (APP) configured using the BDX App or one of the 8 ballistic groups by pressing
and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE
button which will save your setting and index to the next setting for configuration. If you do not
press and release the MODE button the rangefinder will save your selection and turn off. The
programming sequence for selecting a custom ballistic profile or ballistic group is grP1 > grP2
> grP3 > grP4 > grP5 > grP6 > grP7 > grP8 > APP > grP1. If you have previously configured a
custom ballistic profile then APP should be flashing. Your KILO must be in BDX-U mode when
®
using a custom bullet profile or any of the 8 embedded groups in order to display your holdover
solution
30