EN
(translation of the original instructions)
WARNING:
•
Always respect applicable legislation for working with electrical equipment in order to reduce
the risk of accidents.
•
Avoid looking directly into the beam of light, as this will result in dazzling.
•
Do not use the lamp near a naked flame.
•
The light source of this luminaire is not replaceable; when the light source reaches its end of
life the whole luminaire shall be replaced.
•
Luminaire is only suitable for direct mounting on non-combustible surfaces.
WARNING - RISK OF FIRE:
Minimum distance from lighted objects 0.1m
USB POWER OUTLET:
•
Built-in USB power outlet to charge mobile devices.
•
Output: 5V, 1A
USE:
•
To turn the lamp on or off, press the A button.
•
To increase the brightness, press the B button.
•
To decrease the brightness, press the C button.
•
When the brightness level is changed, the new
value is saved, and the lamp will start at that level the next time it is turned on.
BATTERY COMPLIANCE:
•
The work light is designed to be used with CEMBRE, Metabo CAS batteries.
•
It will accept the following battery voltages; 12V and 18V.
•
It is possible to use a CEMBRE power supply instead of a battery.
Discarded electrical products must not be disposed of together with household waste. Please
use recycling facilities. Ask your local authority or retailer for advice on recycling.
3
0.1
m
A
B
C