Safescan 1550 Manual Del Usuario página 7

3.6.2 Batch counting using default batch quantities
Press [B]. The batch mode will start. Keep pressing [B] to scroll
through the default batch quantities (20, 25, 40, 50, 100, 200, 500,
1000, 5000)
Press [CLR] or [0] to clear the current set batch amount.
3.6.3 Set preset batch amounts
Turn ON the Power while pressing [B] and [M].
The machine will start in the "batch
Reset mode" The display shows "bAt-SEt".
Press [B] to select the default stored default batch quantities which
you want to change.
Change the selected default batch quantities using the numeric keys.
Press [M] to store new set default batch quantity.
3.7 coUnTInG MIXeD coInS
To successfully count unsorted coins always start with the coin denomination with the biggest diameter.
All coins with a smaller diameter are automatically sorted out to the rejected coin outlet. After counting the coin
denomination with the biggest diameter, proceed counting the next denomination with the following
next biggest diameter.
Set the coin diameter and the coin thickness adjusting key according
to the size of the biggest coin dimensions.
Install the coin bag connector on the side of the machine (rejected
coin output) and attach the coin bag.
Insert the unsorted coins into the hopper and press [START/STOP]
to start counting. All coins with the correct diameter will be counted.
Coins with a smaller diameter are automatically sorted out to the
rejected coin outlet.
When finish counting the first coin denomination, start the 'mixed
coin procedure' for the next denomination with the biggest diameter.
Repeat this procedure till the last denomination with the smallest
diameter is counted.
06