Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the Remote Controller
2) When the unit is powered off:
① Press
"Timer On", and "0.0H" will appear in timer area. Adjust the Timer On
settings now;
② Press
③ Once the adjustment is done, the timer information is sent to the
indoor unit.
Note:
• When Timer On is being set, you can set the power-on mode, fan
speed, and temperature.
• If the timing period is more than 10 hours, the timing period increases
by 1 hour.
• To change the time: Press the corresponding button, change the time,
and then confirm the changes.
• Adjust the Timer on/off to 0.0h to cancel the Timer on/off settings.
5.12 Self cleaning Operation
Press
(see Figure 3.18) to send the Self cleaning signal to the
indoor unit. The
(see Figure 3.17), and the remote controller will display
to adjust the timer settings;
icon is displayed
Figure 3.17
Figure 3.18
V.1
18
Publicidad
